NX-700/700H

NX-700/700HADJUSTMENTControlsPower switchVolume Up/Down keyChannel Up/Down key“FNC” not appears on the sub LCD displayKeyFunctionDisplayMicrophone key[PTT] Transmit -ModularMIC jackKMC-36[PTT]Programmable function keysPanel Test Mode■ Test mode operation featuresKeypad[HOOK]This transceiver has a test mode. To enter test mode,press and hold the [ ] key while turning the transceiverpower ON. Before the transceiver enters test mode, thefrequency version information appears on the LCD momentarily.Test mode can be inhibited by programming. Toexit test mode, turn the transceiver power OFF. The followingfunctions are available in test mode.■ Key operation“FNC” not appears on the sub LCD displayKeyFunctionDisplay[ ] / [ ] Test CH up/down Channel No.[ ] / [ ] Volume up/down -[ ]Push: Squelch level upHold: Squelch offSquelch levelSquelch off:[ ] Wide/Narrow/Very narrowWide: “w”Narrow: “n”Very narrow: “v”[ ] Shift to panel tuning mode -icon appears“FNC” appears on the sub[ ] Function onLCD display[ ] MSK 1200bps and 2400bps 2400bps: icon appears[ ] Test signaling CH up Signaling No.[0] to [9]and [A]to [D],[#], [ ]Key[ ] -Use as the DTMF keypad.If a key is pressed duringtransmission, the DTMFcorresponding to the keythat was presses is sent.“FNC” appears on the sub LCD displayFunctionDisplay[ ] Analog/NXDNAnalog: “A”NXDN: “N”[ ] / [ ] Function off -[ ] - -[ ] LCD all lights LCD all point appears[ ] High power/Low power Low: icon appears[ ] Function off -[ ] Compander on/off On: icon appears[ ] Beat shift on/off On: icon appearsMicrophone key[PTT] Transmit[0] to [9]and [A]to [D],[#], [ ]Function off -• LED indicatorRed LED Lights during transmission.Green LED Lights when there is carrier.• Sub LCD indicator“FNC” Appears at function on.• LCD display in panel test modeSub LCD display +25Main LCD displayTemperature-An SQ5 1- 1Squelch level(Analog mode only)An : Analog narrow modeAw : Analog wide modeNn : NXDN narrow modeNv : NXDN very narrow modeSignaling No.Channel No.44