NX-700/700H
NX-700/700H
NX-700/700H
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>NX</strong>-<strong>700</strong>/<strong>700</strong>HADJUSTMENTItem6. Low RSSIat –118dBmadjust *7[AnalogNarrow]Panel test mode1) Adj item: [An LRSSI]Adjust: [✳✳✳]2) Adj item:[AnL LRSSI]→[AnL’ LRSSI]→[AnC LRSSI]→[AnH’ LRSSI]→[AnH LRSSI]SSG output:–118dBm (0.28µV)(MOD: 1kHz,Dev: ±1.5kHz)Condition Measurement AdjustmentPC test mode1) Adj item: [LowRSSI (Narrow)]2) Adj item: [Low],[Low’], [Center],[High’], [High]SSG output:–118dBm (0.28µV)(MOD: 1kHz,Dev: ±1.5kHz)TestequipmentSSGUnit Terminal Unit Parts MethodANTExt.SPconnector[Panel test mode]After input signalfrom SSG, press[ ] key to store theadjustment value.[PC test mode]After input signalfrom SSG, press[Apply] button tostore the adjustmentvalue.Specifications /Remarks[AnalogWide]1) Adj item: [Aw LRSSI]Adjust: [✳✳✳]2) Adj item:[AwL LRSSI]→[AwL’ LRSSI]→[AwC LRSSI]→[AwH’ LRSSI]→[AwH LRSSI]SSG output:–118dBm (0.28µV)(MOD: 1kHz,Dev: ±3kHz)1) Adj item: [LowRSSI (Wide)]2) Adj item: [Low],[Low’], [Center],[High’], [High]SSG output:–118dBm (0.28µV)(MOD: 1kHz,Dev: ±3kHz)[<strong>NX</strong>DNVeryNarrow]1) Adj item: [Nv LRSSI]Adjust: [✳✳✳]2) Adj item:[NvL LRSSI]→[NvL’ LRSSI]→[NvC LRSSI]→[NvH’ LRSSI]→[NvH LRSSI]SSG output:–118dBm (0.28µV)(MOD: 1kHz,Dev: ±1.5kHz)1) Adj item: [LowRSSI (Very Narrow)]2) Adj item: [Low],[Low’], [Center],[High’], [High]SSG output:–118dBm (0.28µV)(MOD: 1kHz,Dev: ±1.5kHz)Adjust with the analogsignal.*7: Because “RSSI at –118dBm adjust” of <strong>NX</strong>DN Narrow is adjusted by adjusting “RSSI at –118dBm adjust [Analog Narrow]”, it is not necessary toadjust “RSSI at –118dBm adjust” of <strong>NX</strong>DN Narrow.7. High RSSIat –80dBmadjust *8[AnalogNarrow]1) Adj item: [An HRSSI]Adjust: [✳✳✳]2) Adj item:[AnL HRSSI]→[AnL’ HRSSI]→[AnC HRSSI]→[AnH’ HRSSI]→[AnH HRSSI]SSG output:–80dBm (22.4µV)(MOD: 1kHz,Dev: ±1.5kHz)1) Adj item: [HighRSSI (Narrow)]2) Adj item: [Low],[Low’], [Center],[High’], [High]SSG output:–80dBm (22.4µV)(MOD: 1kHz,Dev: ±1.5kHz)SSGANTExt.SPconnector[Panel test mode]After input signalfrom SSG, press[ ] key to store theadjustment value.[PC test mode]After input signalfrom SSG, press[Apply] button tostore the adjustmentvalue.60
Change language