SAILOR 500/250 FleetBroadband

Chapter 2: Getting startedConnecting the IP handsetPower supplyThe Thrane & Thrane IP handset is powered from the LAN interface, usingPower over Ethernet.Starting up the IP handsetThe following procedure is for the Thrane & Thrane IP handset. The proceduremay be different for another type of IP handset.Do as follows:1. Connect the Thrane & Thrane IP handset to one of the LAN (PoE)connectors on the terminal as described in the user manual for thehandset.The handset starts up automatically.2. If the PIN has not been entered in the terminal, you can enter the PIN fromthe IP handset from the BGAN menu of the handset. If your SIM card usesa PIN, you cannot connect to the terminal until the PIN is entered.To enter the PIN, enter the BGAN menu, type in the Administrator username and password followed by the PIN for the terminal.For further information on the IP handset, refer to the user manual for thehandset.22 Connecting the IP handset