SAILOR 500/250 FleetBroadband

Chapter 3: Operating the systemThe IP handsetWhen you connect the Thrane & Thrane IP handset to one of the LAN (PoE)connectors on the terminal you can use the handset display and keypad toenter the PIN or to view the status of the terminal.The IP handset includes the following items for the terminal:• Viewing C/No (signal strength) and UMTS status (“Ready”, “Registering”etc.) for the SAILOR FleetBroadband system• Entering the PIN and PUK for the terminal• Inclusion of the terminal phone book (not editable) in the IP handsetContacts.For further information on the IP handset, see the user manual for the IPhandset.The web interface of the terminalThe web interface is a built-in web server for setting up and controlling theterminal, using a connected computer with a browser. No installation ofsoftware is required.With the web interface you can access the same settings as with the IPhandset, and additionally:• edit the phone book• view properties of the terminal and antenna• set up the interfaces of the terminal• upload softwareWith an administrator password you can also:• set up user rights• set up network user groupsFor information on how to use the web interface, see Using the web interfaceon page 53.32 General