SAILOR 500/250 FleetBroadband

Chapter 4: Using the web interface4444When the proxy server settings are disabled, close your browser.You may need to change this setting back on return to your Internetconnection.Accessing and navigating the web interfaceAccessing the web interfaceTo access the web interface, do as follows:1. Connect your computer to the terminal.2. Start up the terminal.For further information, see Getting started on page 19.3. Open your browser and enter the IP address of the terminal.The standard IP address is 192.168.0.1.NoteIf the IP address is changed and you do not have the new address,you can temporarily set the IP address to the default value bypressing the Reset button next to the SIM slot in the connector panelof the terminal. You can then access the web interface and changethe IP address.Note that if you do not change the IP address, the default IP addresswill only be valid until the terminal is powered off. Then the terminalreturns to the IP address from before the Reset button was pressed.For further information on the Reset button, see Reset button onpage 152.Using the web interfaceIntroduction 55