Human/Machine Interfaces - Schneider Electric

Characteristics.(continued)HMI ControllersMagelis XBT GC HMI Controller with5.7” screenCharacteristics of integrated functionsCounting Channel/frequency Single phase: 4 channels (%I0.0...%I0.3)/100 kHzTwo-phase: 2 channels (%I0.0, %I0.1 and %I0.2, %I0.3)/50 kHzCapacity32 bits (incrementation/decrementation)Positioning Channel 4 configurable PWM or PLS channels (%Q0.0...%Q0.3)Frequency65 kHzControl (PID)YesProcessing on eventYes, on inputs %I0.0...%I0.9 or internal bitCharacteristics of c inputsNumber of input channels 16Nominal input voltage V 24 c sink/source (positive or negative logic)Commons 1Input limit values V 20.4...28.8 cNominal input current mA 6.5 for I0.0, I0.2, I0.4 and I0.6.500 for the other I0.i inputsInput impedance kΩ 3.7 for I0.0, I0.2, I0.4 and I0.6.4.7 for the other I0.i inputsFilter time At state 1 µs Filtering programmed for 0.5 to 20 msAt state 0 µs Filtering programmed for 0.5 to 20 ms (interval of 0.5 ms)Isolation Between channels NoneBetween channels andinternal logicUsing optocouplersCharacteristics of transistor outputsNumber of output channels 16Output logic (1)Source or sinkCommons 2Nominal output values Voltage V 24Output limitVoltage V 20.4...28.8valuesCurrent via channels A 0.2Current via commons A 1.6Response time At state 1 µs 5 for Q0.0 to Q0.3500 for the other Q0.i outputsAt state 0 µs 5 for Q0.0 to Q0.3500 for other Q0.i outputsResidual voltage At state 1 V 0.5 max.Leakage current mA 0.1Protection of outputsNot protectedFuse W 2.5 A, 125 V (non-replaceable)Isolation Between channels NoneBetween channels andinternal logicVrms Using optocouplers1234567Input limits(%)10024.0 to 26.4 V c8Input activity level50 28.8 V c900 10 20 30 40 50 (°C)Ambient temperature102/13