Human/Machine Interfaces - Schneider Electric

GeneralHMI ControllersMagelis XBT GC HMI ControllerMagelis XBT GT, XBT GK Advanced Panelswith control function1PresentationThe Magelis HMI Controller offer brings together HMI and control functions within ina single product. This reduces the amount of equipment required and the associatedcosts throughout the life cycle of the machine.2Magelis.XBT.GC.HMI.ControllerThis offer comprises two ranges:b The compact range: Magelis XBT GC HMI Controllerb The modular range: Magelis XBT GT/GK Advanced Panels + XBT ZC CANMCANopen moduleMagelis XBT GC HMI Controllers(compact range)Magelis XBT GC HMI Controllers optimize setup due to their compact design.34This range comprises 6 touch screen terminals, with the following, depending on themodel:b 3.8” monochrome screen, 12 integrated inputs/6 integrated outputs (sink orsource)b 5.7” monochrome or colour screen, 16 integrated inputs/16 integrated outputs(sink or source)b A wide choice of communication interfaces: USB, serial link, CANopen andEthernetIn order to adapt easily to different configurations, it is possible to add discreteI/O extension modules at the rear of the Controller.56XBT.GT.Advanced.panelsXBT.GK.Advanced.panels+XBT.ZG.CANM.moduleMagelis XBT GT/GK Advanced Panels + XBT ZC CANM CANopen module(modular range)This range comprises complete Magelis XBT GT or Magelis XBT GK AdvancedPanel offers to which a control part is added with the CANopen moduleXBT ZG CANM. During operation, this module controls the I/O and the peripheralsdistributed via the CANopen bus.The combination with Magelis XBT GT or Magelis XBT GK Advanced Panels gives awide choice of screen sizes and types of data entry, depending on the model:b 17 XBT GT touch screen terminals:v 5.7” monochrome or colour screensv 7.5”, 10.4”, 12.1” and 15” colour screensb 3 XBT GK terminals with keypad and/or touch screen:v 5.7” monochrome or colour screensv 10.4” colour screens789HMI.function:.Magelis.XBT.GT/GK.Advanced.Panels+.Control.function:.XBT.ZG.CANM.CANopen.master.moduleThis combination also offers numerous advanced functions such as video, datamanagement (sharing of data, log), etc.OperationWith their fast, multitasking processors, all the HMI Controllers combine HMI andcontrol functions and share the same screen and communication features anddimensions.The internal memory can be freely used by both the HMI function and the controlfunction.Processing is split 75% on the HMI part and 25% on the control part. Theprocessing can be configured for 3 tasks, including 1 master task.XBT GC HMI Controllers also have the same I/O modules, the same Telefastpre-wired system and the same peripherals on the CANopen bus as the M238 logiccontroller.10XBT GC references:page 2/14XBT GT/GK with control function references:pages 2/31 to 2/332/4