Human/Machine Interfaces - Schneider Electric

Presentation,descriptionHMI ControllersCANopen busCANopen bus master module for XBT GC1PresentationThe SoMachine software is used to configure the CANopen bus on the XBT GC HMIController.23The various services available are:b One or more profiles are supplied for Schneider Electric slaves such asATV 312/61/71 variable speed drives and Lexium 32 servo drives. This makes itpossible to configure the slave according to a predefined mode.Profiles provide a defined operating mode so that there is no need for users toconfigure the mode.b For third-party slavesv The user can choose from a list which can be modified. This simply involvesimporting an EDS (Electronic Data Sheet) description filev The slave can be positioned on the bus: the slave number, speed, monitoring,etc. can be definedv The user can select variables from the list of variables managed by the slavev A link between variables and the data exchangedv Symbolization of data exchanged4557720813DescriptionThe XBT ZGC CAN CANopen bus master module consists of:1 3 LEDs (PWR, RUN, ERR) providing details of the power supply status andmodule operation2 A 9-way male SUB-D connector for connecting to the CANopen bus3 A connector for connecting to the XBT GC HMI Controller61757721028910Characteristics:page 2/29References:page 2/292/28