Human/Machine Interfaces - Schneider Electric

Description.Industrial PCsMagelis Compact iPC PC panels126123Description of Compact iPC8.4” touch screen front panel MPC KT1 2NAX 00pThe touch screen front panel of the 8.4” MPC KT1 2NAX 00p industrial PCs comprises:1 A 8.4” SVGA active matrix colour TFT LCD screen (maximum display area 800 x600 points) with high-definition analog touch panel2 An aluminium alloy front panel with IP 65 membrane (mounted on a treatedsteel frame)3 Two LEDs marked:vvON (green), PC switched onDISK (green), accessing IDE bus (accessing hard disk memory, etc.)3421 3 7Underside and side panels, 8.4”All expansion slots and connection elements are accessible from the rear of the PC:1 A connector for plugging in the 100 to 40 V a power cable2 One vent fitted with an anti-dust filter and fan3 A slot for an additional Compact Flash memory card4 Two 9-pin male SUB-D connectors marked COM1 and COM for serial links (seedetails on page 3/)5 4 USB .0 ports6 RJ45 connectors for the Ethernet link:v 1 x 10/100/1000 Mbpsv 1 x 10/100 Mbps7 A slot for a PCI bus expansion cardNote:.AC.versions.have.an.On/Off.switch.546567123412” touch screen front panel MPC KT2 2pAX 20NThe touch screen front panel of the 1” MPC KT2 2pAX 20N industrial PCs comprises:1 A 1” XGA active matrix colour TFT LCD screen (maximum display area1024 x 768 points) with high-definition analog touch panel2 An aluminium alloy front panel with IP 65 membrane (mounted on a treatedsteel frame)3 Two LEDs marked:v ON (green), PC switched onv DISK (green), accessing IDE bus (accessing hard disk memory, etc.)4 A cover plate which provides IP 65 protection when in position and gives accesswhen removed to:v a USB .0 portv a "pencil point" RESET button for restarting the processor89102 3 4978156Underside and side panels, 12”All expansion slots and connection elements are accessible from the rear of the PC:1 A connector for plugging in the 100 to 40 V a power cable2 One vent fitted with an anti-dust filter and fan3 A slot for an additional Compact Flash memory card4 A 9-pin male SUB-D connector marked COM1 for serial links (see details onpage 3/)5 4 USB .0 ports6 A slot for 1 additional PCMCIA card7 RJ45 connectors for the Ethernet link:v 1 x 10/100/1000 Mbpsv 1 x 10/100 Mbps8 A slot for a PCI bus expansion card9 An RAS portNote:.AC.versions.have.an.On/Off.switch.Presentation:page 3/18Architecture:page 3/19Characteristics:page 3/ to 3/4References:pages 3/5 and 3/6Dimensions:page 3/73/0