TASKING VX-toolset for ARM User Guide

TASKING VX-toolset for ARM User GuideIconActionDisconnectDescriptionDetaches the debugger from the selected process (useful for debuggingattached processes).Stepping through the applicationIconActionStep intoStep overStep returnInstructionsteppingInterrupt awaresteppingDescriptionSteps to the next source line or instruction.Steps over a called function. The function is executed and the applicationsuspends at the next instruction after the call.Executes the current function. The application suspends at the nextinstruction after the return of the function.Toggle. If enabled, the stepping functions are performed on instruction levelinstead of on C source line level.Toggle. If enabled, the stepping functions do not step into an interrupt whenit occurs.MiscellaneousIconActionCopy StackEdit project...Edit SourceLookup...DescriptionRight-click menu. Copies the stack as text to the windows clipboard. Youcan paste the copied selection as text in, for example, a text editor.Right-click menu. Opens the debug configuration dialog to let you edit thecurrent debug configuration.Right-click menu. Opens the Edit Source Lookup Path window to let youedit the search path for locating source files.11.4.2. Breakpoints ViewYou can add, disable and remove breakpoints by clicking in the marker bar (left margin) of the Editorview. This is explained in the Getting Started manual.DescriptionThe Breakpoints view shows a list of breakpoints that are currently set. The button bar in the Breakpointsview gives access to several common functions. The right-most button opens the Breakpoints menu.Types of breakpointsTo access the breakpoints dialog, add a breakpoint as follows:1. Click the Add TASKING Breakpoint button ( ).The Breakpoints dialog appears.276