TASKING VX-toolset for ARM User Guide

TASKING VX-toolset for ARM User GuideThe include files for the STLport C++ libraries are present in directory include.stl relative to theproduct installation directory.You can find more information on the STLport library on the following site:http://stlport.sourgeforge.net/Also read the license agreement on http://stlport.sourgeforge.net/License.shtml. This license agreementis applicable to the STLport C++ library only. All other product components fall under the TASKING licenseagreement.For an STL Programmer's Guide you can see http://www.sgi.com/tech/stl/index.htmlThe following C++ libraries are delivered with the product:Librariescparm[s][x].libcpthumb[s][x].libstlarmx.libstlthumbx.libDescriptionC++ libraries for ARM and ThumbOptional letter:s = single precision floating-pointx = exception handlingSTLport C++ libraries (exception handling variants only)Optional letter:s = single precision floating-pointTo build an STLport library1. Change to the directoryinstalldir\lib\src.stl\[v6M][v7EM][v7M][v7R]\[le][be][be32]\stl[arm|thumb]x,depending on the library set used by your project.2. Run the makefile by executing installdir\bin\mkarm.exe without arguments.3. Copy the generated C++ library stl[arm|thumb]x.lib to the corresponding directoryinstalldir\lib\[v6M][v7EM][v7M][v7R]\[le][be][be32].where,[v6M][v7EM][v7M][v7R][le][be][be32]libraries for ARMv6-M architectureslibraries for ARMv7E-M architectureslibraries for ARMv7-M architectureslibraries for ARMv7-R architectureslittle-endian library variantbig-endian library variantbig-endian 32 library variant740