TASKING VX-toolset for ARM User Guide

Tool OptionsC++ compiler option: --list-file (-L)Menu entry-Command line syntax--list-file=file-LfileDefault: -1DescriptionGenerate raw listing information in the file. This information is likely to be used to generate a formattedlisting. The raw listing file contains raw source lines, information on transitions into and out of includefiles, and diagnostics generated by the C++ compiler.Each line of the listing file begins with a key character that identifies the type of line, as follows:NXSLA normal line of source; the rest of the line is the text of the line.The expanded form of a normal line of source; the rest of the line is the text of the line.This line appears following the N line, and only if the line contains non-trivial modifications(comments are considered trivial modifications; macro expansions, line splices, andtrigraphs are considered non-trivial modifications). Comments are replaced by a singlespace in the expanded-form line.A line of source skipped by an #if or the like; the rest of the line is text. Note that the#else, #elif, or #endif that ends a skip is marked with an N.An indication of a change in source position. The line has a format similar to the #line-identifying directive output by the C preprocessor, that is to sayLline_number "file-name" [key]where key is, 1 for entry into an include file, or 2 for exit from an include file, and omittedotherwise.The first line in the raw listing file is always an L line identifying the primary input file. Llines are also output for #line directives (key is omitted). L lines indicate the source positionof the following source line in the raw listing file.413