TASKING VX-toolset for ARM User Guide

Tool OptionsControl program option: --pass (-W)Menu entry1. Select C/C++ Compiler » Miscellaneous or Assembler » Miscellaneous or Linker » Miscellaneous.2. Add an option to the Additional options field.Be aware that the options in the option file are added to the options you have set in the other pages.Only in extraordinary cases you may want to use them in combination. The assembler options arepreceded by -Wa and the linker options are preceded by -Wl. For the C/C++ options you have to dothis manually.Command line syntax--pass-assembler=option--pass-c=option--pass-c++=option--pass-linker=optionDescription-Waoption-Wcoption-Wcpoption-WloptionPass option directly to the assemblerPass option directly to the C compilerPass option directly to the C++ compilerPass option directly to the linkerWith this option you tell the control program to call a tool with the specified option. The control programdoes not use or interpret the option itself, but specifies it directly to the tool which it calls.ExampleTo pass the option --verbose directly to the linker, enter:ccarm --pass-linker=--verbose test.cRelated information-637