TASKING VX-toolset for ARM User Guide

TASKING VX-toolset for ARM User Guide16.2.12. Section Layout Definitionsection_definition ::= section_layout 0|1 0|1{ >=0 }• A section definition inside a space definition does not have a space_ref.• All global section definitions have a space_ref.space_ref ::= 0|1 : 0|1: space_name >=0• If more than one processor is present, the proc_name must be given for a global section layout.• If the section layout refers to a processor that has more than one core, the core_name must be givenin the space_ref.• A proc_name refers to a defined processor.• A core_name refers to a defined core.• A space_name refers to a defined address space.space_layout_properties::= space_layout_property >=0space_layout_property::= locate_direction| taglocate_direction ::= direction = directiondirection::= low_to_high| high_to_low• A section layout contains at most one direction statement.• If you do not specify the direction statement, the locate direction of the section layout islow-to-high.section_statement::= simple_section_statement ;| aggregate_section_statementsimple_section_statement::= assignment| select_section_statement| special_section_statementassignment::= symbol_name assign_op expr814