TASKING VX-toolset for ARM User Guide

Debug Target Configuration FilesElement / AttributenamedebugInstrumentgdiMethoddefidresourceidvaluerefidconfigurationnameinitializeresourceIdnamevalueDescriptionA descriptive name of the communicationmethod.The debug instrument DLL/Shared library fileto be used for this communication method. Donot supply a path or a filename suffix.This is the method used for communication.Allowed values: rs232, tcpip, can, noneDefines a set of elements as a macro. Themacro can be expanded using the refelement.The macro name.Defines a resource definition that can be usedby Eclipse, the debugger or by the debuginstrument.The identifier name used by the debugger ordebug instrument to retrieve the value.The value assigned to the resource.Reference to a macro defined with a defelement. The elements contained in the defelement with the same name will be expandedat the location of the ref. Multiple refs to thesame def are allowed.The name of the referenced macro.Defines a configuration.The descriptive name of the configuration.This element defines an initializationexpression. Each initialize element contains aresourceId attribute. If the DI requests thisresource the debugger will compose a stringfrom all initialize elements with the sameresourceId. This DI can use this string toinitialize registers by passing it to the debuggeras an expression to be evaluated.The name of the resource to be used.The name of the register to be initialized.When the cstart attribute is false, this is thevalue to be used, otherwise, it is the defaultvalue when using this configuration. It will beused by the startup code editor to set thedefault register values.Allowed Elementslsl, resource, initialize,ref, configuration,flashMonitor--ref, initialize, resource,lsl, flashMonitor,processor-849