7.5 clutch release cover - harley-davidson-sweden.se

HOMESERVICE WEAR LIMITS (CONT.’D)COUNTERSHAFTTOLERANCEIN.MMCountershaft runout 0.000-0.003 0.00-0.08Countershaft end play none none1st gear clearance 0.0003-0.0019 0.008-0.0481st gear end play 0.0050-0.0039 0.127-0.0992nd gear clearance 0.0003-0.0019 0.008-0.0482nd gear end play 0.0050-0.0440 0.127-1.1183rd gear clearance 0.0000-0.0080 0.000-0.2034th gear clearance 0.0000-0.0080 0.000-0.2034th gear end play 0.0050-0.0390 0.127-0.9915th gear clearance 0.0000-0.0080 0.000-0.2035th gear end play 0.0050-0.0040 0.127-0.102TORQUE VALUESItem ft/in-lbs NmShifter linkage rodlocknuts80-120 in-lbs 9.0-13.6 NmDetent arm pivot screwto right support block84-108 in-lbs 9.5-12.2 NmShifter cam supportblock screws84-108 in-lbs 9-12 NmTransmission top coversocket head screws84-108 in-lbs 9-12 NmNeutral switch 120-180 in-lbs 13.6-20.3 NmClutch release coversocket head screws120-144 in-lbs 13.6-16.3 NmClutch cable fitting 36-60 in-lbs 4-7 NmTransmission lubricantdrain plug14-21 ft-lbs 19-28 NmTransmission fillerplug/dipstick25-75 in-lbs 2.8-8.5 NmTransmission side door5/16 inch screws1/4 inch screwsMainshaft/countershaftlocknutsTransmission mainshaftsprocket nutTransmission sprocketnut lockplate screws13-16 ft-lbs84-108 in-lbs18-22 Nm9-12 Nm45-55 ft-lbs 61-75 Nm60 ft-lbs, then35° to 45°81 Nm, then35° to 45°90-110 in-lbs 10.2-12.4 NmOil pan bolts 84-108 in-lbs 9-12 NmTransmission-to-enginemounting bolts15 ft-lbs,then30-35 ft-lbs20.3 Nm,then40.7-47.5 NmOil hose cover 84-108 in-lbs 10-12 NmRear swingarmbracket bolts34-42 ft-lbs 46-57 NmRear swingarmpivot shaft locknut40-45 ft-lbs 54-61 NmShifter lever to shiftershaft socket head screw18-22 ft-lbs 24-30 NmEngine oil drain plug 14-21 ft-lbs 19-28 Nm7-2 2004 Touring: Transmission