Hitachi ZX14-27 -3 - One Call Hire

SAFETYEquipment of OPG• In case the machine is operated in areas where thepossibility of falling stones or debris exists, equip genuineHitachi OPG guard. Contact your nearest Hitachi dealer forinstallation method of the OPG guard. Depending on thespecifications applied to your machine, modification of themachine to meet ROPS standards will be possible.• To maintain unimpaired operator protection andmanufacture's protective structure.• Damaged ROPS, OPG guard must be replaced, notrepaired or revised.• Any alternation to the ROPS or OPG guard must beapproved by the manufacturer.ROPS : Roll Over Protective StructureOPG : Operator Protective GuardProvide Signals for Jobs Involving MultipleMachines• In case more than one machine is operated in the samejob site, accidental collision between machines may causeserious injury or death.• For jobs involving multiple machines, provide signalscommonly known by all personnel involved. Also, appointa signal person to coordinate the job site. Make sure that allpersonnel obey the signal person’s directions.SA-481Confirm Direction of Machine to be Driven• Incorrect travel pedal/lever operation may result in seriousinjury death.• Before driving the machine, confirm the position of theundercarriage in relation to the operator’s position.• If the travel motors are located towards the front of thecab, the machine will move in the reverse direction whentravel pedals/levers are operated.SA-1294S-10