13.07.2015 Views

Hitachi ZX14-27 -3 - One Call Hire

Hitachi ZX14-27 -3 - One Call Hire

Hitachi ZX14-27 -3 - One Call Hire

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SAFETYDrive Machine Safely• Use a signal person when traveling the machine along roadshoulders or in congested areas.• Driving the machine in the incorrect direction may result inserious injury or death and/or severe damage to property.• Before driving the machine, always confirm that the travelpedals/levers direction corresponds to the direction youwish to drive.• Be sure to detour around any obstructions.• Avoid traveling over obstructions. Soil, fragments of rocks,and/or metal pieces may scatter around the machine. Donot allow personnel to stay around the machine whiletraveling.ASA-1295• Driving on a slope may cause the machine to slip oroverturn, possibly resulting in serious injury or death.• Never attempt to ascend or descend (B) degrees orsteeper slopes.B : <strong>ZX14</strong>-3, 16-3, 18-3 : 25˚ZX<strong>27</strong>-3 : 30˚• Be sure to fasten the seat belt.• When driving up or down a slope, keep the bucket facingthe direction of travel, approximately 200 to 300 mm (8 to12 in) (A) above the ground.• If machine starts to skid or becomes unstable,immediately lower the bucket to the ground and stop.• Driving across the face of a slope or steering on aslope may cause the machine to skid or turnover. Ifthe direction must be changed, move the machine tolevel ground, then, change the direction to ensure safeoperation.• Avoid swinging the upperstructure on slopes. Neverattempt to swing the upperstructure downhill. Themachine may tip over. If swinging uphill is unavoidable,carefully operate the upperstructure and boom at slowspeed.• If the engine stalls on a slope, immediately lower thebucket to the ground. Return the control levers to neutral.Then, restart the engine.• Be sure to thoroughly warm up the machine beforeascending steep slopes. If hydraulic oil has not warmedup sufficiently, sufficient performance may not beobtained.WRONGASA-1296SA-441SA-590S-11

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!