Vivotek FD8161 User Manual - Use-IP

VIVOTEK3-axis Mechanism DesignThe sophisticated 3-axis mechanism design offers very flexible, easy hardware installation foreither ceiling or wall mount.DO NOT over rotate the lens. Doingso will damage the camera lensmodulePan 350°Pan Adjustment ScrewTilt Adjustment ScrewRotate 350°Tilt 85°Rotation Adjustment ScrewTo adjust the zoom factor and focus range1. Loosen the zoom controller to adjust the zoom factor. Upon completion, tighten the zoomcontroller.2. Loosen the focus controller to adjust the focus range. Upon completion, tighten the focuscontroller.Int. NTSCON1 21 2 3 4 AV Out Audio In Ext PALLoosenWNTTighten8Completion1. Rotate the black cover inside the dome cover to fit the lens shooting direction.2. Attach the dome cover to camera.3. Secure the two dome screws with a screwdriver. Finally, make sure all parts of the camera aresecurely installed.321The supplied screwdriver is exclusivelydesigned to match the dome screws. In caseyou will need to adjust the lens later, do notdiscard the screwdriver.12 - User's Manual