Vivotek FD8161 User Manual - Use-IP

VIVOTEKWhite balance: Adjust the value for the best color temperature.■ AutoThe Network Camera automatically adjusts the color temperature of the light in response to different lightsources. The white balance setting defaults to Auto and works well in most situations.■ Keep current valueFollow the steps below to manually set the white balance to compensate for the ambient lightingconditions.1. Set the White balance to Auto and click Save.2. Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the colortemperature automatically.3. Select Keep Current Value to confirm the setting while the white balance is being measured.4. Click Save to enable the new setting.Image Adjustment■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.■ Saturation: Adjust the image saturation level, which ranges from -5 to +5.■ Contrast: Adjust the image contrast level, which ranges from -5 to +5.■ Sharpness: Adjust the image sharpness level, which ranges from -5 to +5.You can click Preview to fine-tune the image, or click Restore to recall the original settings withoutincorporating the changes. When completed with the settings on this page, click Save to enable thesetting and click Close to exit the page.56 - User's Manual