Vivotek FD8161 User Manual - Use-IP

VIVOTEKftp_passive 0, 1 6/6 Enable or disable passive mode.0 = disable passive mode1 = enable passive modeemail_address string[128] 6/6 Email server address.email_sslmode 0, 1 6/6 Enable support SSL.email_port 0~65535 6/6 Port to connect to the server.email_username string[64] 6/6 Username to log in to the server.email_passwd string[64] 6/6 Password of the user.email_senderemail string[128] 6/6 Email address of the sender.email_recipientemail string[128] 6/6 Email address of the recipient.ns_location string[128] 6/6 Location to upload or store the media.ns_username string[64] 6/6 Username to log in to the server.ns_passwd string[64] 6/6 Password of the user.ns_workgroup string[64] 6/6 Workgroup for network storage.Group: media_i (media_freespace is used internally.)PARAMETER VALUE SECURITYDESCRIPTION(get/set)name string[40] 6/6 Identification of this entrytypesnapshot,systemlog,videoclip,recordmsg6/6 Media type to send to the server or store on the server.snapshot_source 6/6 Indicate the source of media stream.0 means the first stream.1 means the second stream and etc.2 means the third stream and etc.3 means the fourth stream and etc.snapshot_prefix string[16] 6/6 Indicate the prefix of the filename.snapshot_datesuffix 0, 1 6/6 Add date and time suffix to filename:1 = Add date and time suffix.0 = Do not add.snapshot_preevent 0 ~ 7 6/6 Indicates the number of pre-event images.snapshot_postevent 0 ~ 7 6/6 The number of post-event images.videoclip_source 6/6 Indicate the source of media stream.0 means the first stream.1 means the second stream and etc.2 means the third stream and etc.3 means the fourth stream and etc.User's Manual - 137