Vivotek FD8161 User Manual - Use-IP

VIVOTEKFTP: Select to send the media files to an FTP server when a trigger is activated.■ Server address: Enter the domain name or IP address of the FTP server.■ Server portBy default, the FTP server port is set to 21. It can also be assigned to another port number between1025 and 65535.■ User name: Enter the login name of the FTP account.■ Password: Enter the password of the FTP account.■ FTP folder nameEnter the folder where the media file will be placed. If the folder name does not exist, the NetworkCamera will create one on the FTP server.■ Passive modeMost firewalls do not accept new connections initiated from external requests. If the FTP serversupports passive mode, select this option to enable passive mode FTP and allow data transmission topass through the firewall.To verify if the FTP settings are correctly configured, click Test. The result will be shown in a pop-upwindow as shown below. If successful, you will also receive a test.txt file on the FTP server.Click Save to enable the settings, then click Close to exit the page.User's Manual - 85