Vivotek FD8161 User Manual - Use-IP

VIVOTEKE-Preset PositionsA total of 20 preset positions can be configured. You can select preset positions for the camera to patrol.Please follow the steps below to preset a position:1. Adjust the shooting area to the desired position using the buttons on the right side of the window.2. Enter a name for the preset position, which allows for up to forty characters. Click Add to enable thesettings. The preset positions will be displayed under the Preset Location list on the left-hand side.3. To add additional preset positions, please repeat steps 1~2.4. To remove a preset position from the list, select it from the drop-down list and click Delete.5. The e-preset positions will also displayed on the main page. Please refer to the illustration on page 74.6. Click Save to enable the settings.1Functions are the sameas the Control Panel onthe home page224672 - User's Manual