Vivotek FD8161 User Manual - Use-IP

VIVOTEKAccess List Advanced ModeThis section explains how to control access permission by verifying the client PC’s IP address.General SettingsMaximum number of concurrent streaming connection(s) limited to: Simultaneous live viewing for 1~10clients (including stream 1 and stream 2). The default value is 10. If you modify the value and click Save,all current connections will be disconnected and automatically attempt to re-link (IE Explore or QuickTime Player).View Information: Click this button to display the connection status window showing a list of the currentconnections.For example:Connection statusIP address192.168.1.14761.22.15.3192.168.3.25Elapsed time12:20:3400:10:0945:00:34User IDrootanonymousgregRefreshAdd to Deny ListDisconnect■ IP address: Current connections to the Network Camera.■ Elapsed time: How much time the client has been at the webpage.■ User ID: If the administrator has set a password for the webpage, the clients have to enter a user nameand password to access the live video. The user name will be displayed in the User ID column. If theadministrator allows clients to link to the webpage without a user name and password, the User IDcolumn will be empty.There are some situations which allow clients access to the live video without a user name andpassword:1. The administrator does not set up a root password. For more information about how to set up a rootpassword and manage user accounts, please refer to Security on page 27.2. The administrator has set up a root password, but set RTSP Authentication to “disable“. For moreinformation about RTSP Authentication, please refer to RTSP Streaming on page 47.3. The administrator has set up a root password, but allows anonymous viewing. For more informationabout Allow Anonymous Viewing, please refer to Security on page 27.User's Manual - 51