13.07.2015 Views

Vivotek FD8161 User Manual - Use-IP

Vivotek FD8161 User Manual - Use-IP

Vivotek FD8161 User Manual - Use-IP

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

VIVOTEKNetworkThis section explains how to configure a wired network connection for the Network Camera.Network TypeLANSelect this option when the Network Camera is deployed on a local area network (LAN) and is intendedto be accessed by local computers. The default setting for the Network Type is LAN. Rememer to clickSave when you complete the Network setting.Get <strong>IP</strong> address automatically: Select this option to obtain an available dynamic <strong>IP</strong> address assigned bythe DHCP server each time the camera is connected to the LAN.<strong>Use</strong> fixed <strong>IP</strong> address: Select this option to manually assign a static <strong>IP</strong> address to the Network Camera.1. You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the NetworkCamera on LAN. Please refer to Software Installation on page 11 for details.2. Enter the Static <strong>IP</strong>, Subnet mask, Default router, and Primary DNS provided by your ISP.Subnet mask: This is used to determine if the destination is in the same subnet. The default value is“255.255.255.0”.Default router: This is the gateway used to forward frames to destinations in a different subnet. Invalidrouter setting will fail the transmission to destinations in different subnet.34 - <strong><strong>Use</strong>r</strong>'s <strong>Manual</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!