IF302 - English Manual - Smar

More documents

Recommendations

Info

IF302 - Operation and Maintenance Instruction ManualJ1 Jumper ConnectionsW1 Jumper ConnectionsIf J1 (see figure 3.10) is connected to ON, it is possible to simulate values and status through theSIMULATE parameter, from the function blocks.If W1(see figure 3.10) is connected to ON, the local adjustment programming tree is enabled, theblock parameters can be adjusted and the communication can be pre-configured via localadjustment.WROFFJ1ONOFFW1ONLOCADJMAIN BOARDFig. 3.10 - J1 and W1 JumpersIn order tostart the localadjustment,place themagnetic toolin orifice Zand wait untilletters MDaredisplayed.5.00 5.00Place themagnetictool in orificeS and waitduring 5seconds.Figure 3.11 - Step 1 - IF3023.10
ConfigurationRemovethemagnetictool fromorifice S.Insert themagnetictool in orificeS once moreand LOCADJ shouldbedisplayed.5.00Figure 3.12 - Step 2 - IF302In this option (P_VAL)is showed with itsrespective value(if you to want that itkeeps static, put thetool in S orifice andstay there.5.00P_VAL3.8LOWERThis parameter isused to calibrate thelower current point. Inorder to range thelower value, simplyinsert the magnetictool in orifice S assoon as lower isshown on the display.An arrow pointingupward ( ) incrementthe value and anarrow pointingdownward (↓)decrement the value.Figure 3.13 - Step 3 - IF302In order todecrementthe lowervalue, placethe magnetictool in orificeZ to shift thearrow to thedownwardposition andthen, byinserting andkeeping thetool in orificeS, it isThis parameter is usedto calibrate the uppercurrent point. In orderto range the uppervalue, simply insert themagnetic tool in orificeS as soon as upper isshown on the display.An arrow pointingupward ( ) incrementthe value and an arrowpointing downward (↓)decrement the value.Apply the 20.0 mAcurrent in the 1 and 4Figure 3.14 - Step 4 - IF3023.11
Page 4 and 5: IF302 - Operation and Maintenance I
Page 40: IF302 - Operation and Maintenance I

IF302 - English Manual - Smar

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?