Operating Instructions - Panasonic

Operating InstructionsBasic Settings PageSettingDestination FolderDestination HardDisk SpaceLimit the destinationrecording capacityConnection methodto the cameraDescriptionSpecify the destination folder to save recorded images (seepage 15).Set enough capacity as your destination disk to prevent thesystem from getting unstable. (100 MB (Default) to 50,000 MB).To specify the limit of how much data can be recorded on thedestination disk, select [Limit the destination recording capacity]and enter a value in [Destination Recording Capacity Limit].Select [Stop all the recordings] or [Delete old files and keeprecording] (by 1 minute) when the capacity is full.Set the connection method to use for audio and video when thecamera’s data format is set to JPEG (see page 25).If you monitor and record camera images with audio over theinternet, the audio may be interrupted due to the networkenvironment. If this is the case, select [Images and audio areconnected separately].There is a limit to the number of connections to the same camerausing this software (including BB-HNP11). If you select [Audioand images are sent using one connection], do not make morethan 4 connections to the same camera. If you are making morethan 4 connections, select [Images and audio are connectedseparately].14