Operating Instructions - Panasonic

Operating InstructionsIcon of Toolbar and Slide WindowClose the operation window.Move the focus to the previouscamera. (Enable if there is aprevious camera and disable ifthere is not a previous camera).Move the focus to the next camera.(Enable if there is a next cameraand disable if there is not a nextcamera).Display the multi-playbackpage.Display the recorded imagespage.Display the timer list for allcameras.Display the settings page.NoteDisplays the number of the currentpage, and the total number ofpages. Move to a specific page byentering the page number.Display the previous page.(Enable if there is a previouspage, disable if there is nota previous page.)Display the next page.(Enable if there is a nextpage, disable if there is nota next page.)Start manual recording of theselected camera.Start manual motion detectionrecording of the selected camera.Start manual alarm recording(alarm recording of all, alarm 1/sensor, alarm 2) of the selectedcamera.Stop manual recording.Display the single-monitoringpage.Display the multi-monitoringpage.Select all displayed cameras.(When you change pages,the selected will be cleared.)Clear the selection from allcameras.Shrink the size of the display ofthe selected camera’s image.Expand the size of the display ofthe selected camera’s imageChange the display to fullscreen mode.Change the display towindow mode.Display/Hide the cameraoperation bar.Take snapshots from thefocus camera.Transmit audio to camerasthat support audio features(see page 121).Set the volume of the selectedcamera (see page 86).Operate remote access(see page 108).Reconnect to the server(see page 113).If you drag the toolbar right or left, icons displayed on the toolbar will be changed.Drag to right.49