Operating Instructions - Panasonic

Operating InstructionsSettingData FormatImage QualityAudio RecordingSettingsResolutionRecordedFrequencyCalculated diskcapacity to recordRecording imagesDescriptionSelect the data format for the camera. [JPEG (Default),MPEG-4]. (If the camera does not support the MPEG-4 format,this option will be disabled.)Select the image quality for the camera when using the JPEGformat. [Favor Clarity, Standard (Default), Favor Motion].(If using the MPEG-4 format, this option will be disabled.)Select to record the image with audio or only images.Select the resolution of the image.The resolutions that are available depend on the camera anddata format. Default is 320 x 240.Set the interval at which to record images when using theJPEG format. [Not Specify, Specify (Record images atspecified interval)]If you record images as they are set on the camera, set to [NotSpecify].If you select [Specify], [Display the error message if the programdoes not work in the specified frequency] will be enabled.Select this option if you want to display the error message (seepage 26).(If using the MPEG-4 format, this option will be disabled.)The estimated amount of necessary disk space is calculatedbased on the number of days of recorded that is specified.[1 to 60 days. Default is 30 days]Select whether to display an error message when, duringrecording, image data cannot be obtained for 1 minute.Note• If you select the MPEG-4 format, CPU usage will be higher. To reduce CPUusage, select [Specify the frame rate] from [Preferences] → [Multi-monitoring],and set the frame rate to a low value.• If you selected the MPEG-4 format, the following confirmation window will bedisplayed.25