download - Nuts & Volts Magazine

STEP 11: Breadboard AssemblyParts Required• (1) Breadboard, 3.19” L x 1.65” W• (2) Breadboard, 30 Row X 2 Column• (1) Breadboard Mounting PlateTools Required• NoneAssemble the three breadboard sections so that they look like the figure below.Carefully remove the strip covering the adhesive backing on the Breadboard sections.Before adhering it to the Breadboard mounting Plate, align it carefully so you do not cover up themounting holes, as you won’t be able to remove and reposition it again.When you are sure of your alignment, stick the assembled breadboards to the Breadboard MountingPlate as shown by the cross-hatch area in the figure below.Breadboard, 3.19” L x 1.65” WBreadboard,30 Row X 2 ColumnDo NOT stick breadboardassembly over mounting holesBreadboard Mounting PlateCopyright © Parallax Inc. Stingray Robot (#28980) v1.1 10/6/2009 Page 14 of 26