Manuale Officina LGW 523-627 - lombardini service

Disassembly / Reassembly4Hydraulic pump driveA = Third driveYou can mount a 2P hydraulic pump on the third drive with Boschflanging, or a 1 PD type one.You can draw 7 KW of power from the third drive corresponding to a37 Nm torque at 3600 rpm (engine revolutions).Drive ratio, engine revs/pump revs = 1:0.5.145Third drive, components1 Splined sleeve2 Toothed pinion3 Seal ring4 Flange for 1 PD hydraulic pump5 Seal ringNote: Sleeve 1 also includes the fuel pump control cam and isfastened with the same standard cam screw, with a tighteningtorque of 80 Nm + 90°. Tighten pinion 2 to the hydraulic pump at 45 Nm146. ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... .....................................................................................................................................................FOCS Workshop Manual_cod. 1.5302.351_7° ed_ rev. 06- 65 -