56701-IPI only

VENTINGVERTICAL VENT SYSTEM CLEARANCESTOP BOTTOM SIDESALL RIGID PIPE APPLICATIONS 1 inch (25 mm) 1 inch (25 mm) 1 inch (25 mm)KOZY HEAT #700 SERIESDO NOT USE FOR VERTICAL TERMINATIONSVERTICAL TERMINATIONS (top vent)MAXIMUM: 33 ft. (10.06m) + cap.NOTE: Flange on top stand-off must be bent upwards to a 90˚ angle when top venting.VERTICAL TERMINATIONS (rear vent)MINIMUM: 90˚ elbow +14” ( 356mm) + cap.MAXIMUM: 90˚ elbow + 22 ft. (6.71m) + cap.RESTRICTORA restrictor is included in fireplace components packet.Each installation is unique and affected by various factors including venting configuration, altitude and climate. Therefore, afterfireplace installation is complete a restrictor may be required or may need to be removed or modified.Please refer to page 22 for installation instructions if installing restrictor in conjunction with venting.Page 51 has information on restrictor recommendations depending on burner flame appearance and instructions on installation afterventing is completed.HORIZONTAL & VERTICAL COMBINATION TERMINATIONS (top vent)MAXIMUM: 10 ft. (3.05) horizontal + 20 ft. (6.10 m) vertical + cap. 30 ft (9.14m) total.NOTE: Flange on top stand-off must be bent upwards to a 90˚ angle when top venting.ELBOWSFor each additional 90° elbow used after first elbow, 3 ft. (914 mm) must be subtracted from maximum allowed venting.For each 45° elbow used, 1-1/2 ft. (457 mm) must be subtracted from maximum venting allowed.NOTE: (2) 45° degree elbows may be used in place of (1) 90° elbow.PAGE 21