1900 Series - Maintenance Manual

XII. Reassembly (Contd.)Table 14: Ring Settings for Universal Media Valves (Contd.)Affected Set Pressure Range & Adjusting Ring Position 1OrificeNo. ofNotches25 Notches 30 Notches 35 Notches 40 Notchespsig barg psig barg psig barg psig bargD 24 1601 3200 110.39 220.63 3201 6250 220.70 430.92 - - - - - - - -E 24 1601 3200 110.39 220.63 3201 6250 220.70 430.92 - - - - - - - -F 24 4801 6250 331.02 430.92 - - - - - - - - - - - -G 30 3201 5000 220.70 344.74 - - - - - - - - - - - -H 30 1601 3200 110.39 220.63 3201 3300 220.70 227.53 - - - - - - - -J 30 1001 2000 69.02 137.90 2001 3100 137.96 213.74 - - - - - - - -K 32 1001 2000 69.02 137.90 2001 3000 137.96 206.84 - - - - - - - -L 40 1001 2000 69.02 137.90 2001 2900 137.96 199.95 - - - - - - - -M 40 251 500 17.31 34.47 501 1000 34.54 68.95 1001 1600 69.02 110.32 - - - -N 40 251 500 17.31 34.47 501 1000 34.54 68.95 1001 1600 69.02 110.32 - - - -P 40 251 500 17.31 34.47 501 1000 34.54 68.95 1001 1700 69.02 117.21 - - - -Q 48 101 200 6.96 13.79 201 400 13.86 27.58 401 900 27.65 62.05 - - - -R 48 51 100 3.52 6.89 101 200 6.96 13.79 201 400 13.86 27.58 401 650 27.65 44.82T 24 201 360 13.86 24.82 - - - - - - - - - - - -U 24 51 100 3.52 6.89 101 200 6.96 13.79 201 360 13.86 24.82 - - - -V 24 51 100 3.52 6.89 101 200 6.96 13.79 201 300 13.86 20.68 - - - -W 24 51 100 3.52 6.89 101 200 6.96 13.79 201 300 13.86 20.68 - - - -Note 1: Position Relative to Disc HolderATTENTION!!If the valve has an O-ring seat seal, tighten and lockthe adjusting screw (19) before final setting of theadjusting ring (3).ATTENTION!!Ensure the adjusting ring pin (4) enters the notch inthe adjusting ring (3) but does not bind the adjustingring. If binding occurs, cut the adjusting ring pin untiladjusting ring moves freely from side-to-side withinthe notch.