Indoor Unit Outdoor Unit CS-PS9NKV CS-PS12NKV CS ... - Panasonic

11.4 Airflow Direction• There are two types of airflow, vertical airflow (directed by horizontal vane) and horizontal airflow (directed byvertical vanes).• Control of airflow direction can be automatic (angles of direction is determined by operation mode, heatexchanger temperature and intake air temperature) and manual (angles of direction can be adjusted usingremote control).11.4.1 Vertical AirflowOperationModeCoolingSoft DryAirflowVane Angle (°)Direction 1 2 3 4 5Auto 10 ~ 40Manual 10 17.5 25 32.5 40Auto 10 ~ 40Manual 10 17.5 25 32.5 40PS9/12NKOperationModeCoolingSoft DryAirflowVane Angle (°)Direction 1 2 3 4 5Auto 5 ~ 35Manual 5 12.5 20 27.5 35Auto 5 ~ 35Manual 5 12.5 20 27.5 35PS18/24NK• Automatic vertical airflow direction can be set using remote control; the vane swings up and down within theangles as stated above. When the air conditioner is stopped using remote control, the vane will shift to closeposition.• Manual vertical airflow direction can be set using remote control; the angles of the vane are as stated above andthe positions of the vane are as figure below. When the air conditioner is stopped using remote control, the vanewill shift to close position.11.4.2 Horizontal AirflowThe horizontal airflow direction louvers can be adjusted manually by hand.11.5 Timer Control11.5.1 ON Timer ControlON timer can be set using remote control, where the unit with timer set will start operation earlier than the settingtime. This is to provide a comfortable environment when reaching the set ON time.60 minutes before the set ON time, indoor (at fan speed of Lo-) and outdoor fan motor start operation for 30 secondsto determine the indoor intake air temperature and outdoor air temperature in order to judge the operation startingtime.From the above judgment, the decided operation will start operation earlier than the set time as shown below.Indoor intake airtemperature (°C)30255 min10 min15 min30 35Outdoor airtemperature (°C)Cooling / Soft Dry49