13.07.2015 Views

Staff Report and WELO Ordinance - StopWaste.Org

Staff Report and WELO Ordinance - StopWaste.Org

Staff Report and WELO Ordinance - StopWaste.Org

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

systems shall be designed to avoid runoff, low head drainage, overspray, orother similar conditions where water flows onto adjacent property, nonirrigatedareas, walks, roadways or structures. Proper irrigation equipment <strong>and</strong> schedules,including such features such as repeat cycles, shall be used to closely matchmaximum application rates to infiltration rates.2. Equipment.a. Water Meters. Separate l<strong>and</strong>scape water meters shall be installedfor all newly installed or renovated projects subject to this chapter (except singlefamilyhomes). All irrigation equipment throughout all projects must be connectedto the l<strong>and</strong>scape water meter.b. Controllers. Automatic electronic controllers shall be required forall irrigation systems <strong>and</strong> must be able to accommodate all aspects of the design.At a minimum the controller shall have the capability to create two independentprograms, include three cycle start times per program, have a battery backup toprotect the program in the case of power failure, <strong>and</strong> contain a rain switch tointerrupt the program in the case of rain.c. Valves. Electronic valves are required for all irrigation systems. Avalve may irrigate a maximum of one hydrozone of plants with similar water useas described in the plant selection <strong>and</strong> grouping section.d. Sprinkler Heads <strong>and</strong> Emitters. Heads <strong>and</strong> emitters shall havecompatible application rates within each control valve circuit. Sprinkler headsshall be selected for proper area coverage, application rate, operating pressure,adjustment capability, <strong>and</strong> ease of maintenance.e. Antidrain (Check) Valves. Antidrain valves shall be installed atstrategic low points throughout the plan to avoid low-head drainage.f. Rain Sensing Override Devices. Rain sensing override devices arerecommended on all irrigation systems <strong>and</strong> are required on all projects thatcontain at least 10,000 square feet of l<strong>and</strong>scape area.g. Soil Moisture Sensing Devises. Soil moisture sensing devices arerecommended on all irrigation systems.3. Irrigation Design Plan Specifications. The irrigation system shall bedesigned to be consistent with the planting design hydrozones. The irrigationdesign plan shall be drawn on project base sheets. It should be separate from,but use the same format as, the l<strong>and</strong>scape design plan. The scale shall be thesame as that used for the l<strong>and</strong>scape design plan.The irrigation design plan shall accurately <strong>and</strong> clearly identify:a. Location <strong>and</strong> size of separate water meters for l<strong>and</strong>scapeirrigation;b. Location, type, <strong>and</strong> size of all components of the irrigation system,including automatic controllers, main <strong>and</strong> lateral lines, valves, sprinkler heads,emitters, moisture sensing devices, rain sensing devices, quick couplers, <strong>and</strong>backflow prevention devices;c. Static water pressure at the point of connection to the public watersupply;d. Flow rate (gallons per minute), application rate (inches per hour,<strong>and</strong> design operating pressure (psi) for each station.927

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!