Manual Install Slimline P374-1900 Rev. 1

More documents

Recommendations

Info

SECTION 2Remove & Replace the Old Thermostat TOTALINE 2Remove the cover of the old thermostat.If it does not come off easily check for screws.Loosen the screws holding the thermostatbase or subbase to the wall, and lift away.Disconnect the wires from the old thermostat.Tape the ends of the wires as you disconnectthem, and mark them with the letter of theterminal for easy reconnection to the newthermostat.Keep the old thermostat for reference purposes,until your new thermostat is functioning properly.Page 2.1
SECTION 3Configuring the MISC OutputsTOTALINE3Section 3 Contents:Configuring the Jumpers........3.2Explanation of JumperSettings..................................3.3Page 3.1
Page 1 and 2: INSTALLATIONINSTRUCTIONSRESIDENTIAL
Page 4 and 5: Table of ContentsPreparationRemove
Page 8 and 9: W3PROGHUMDEHUMMISC3 MISC2 MISC1 ONL
Page 10 and 11: TOTALINEExplanation of Jumper Setti
Page 12 and 13: SECTION 4Wire ConnectionsTOTALINEIf
Page 14 and 15: W3PROGHUMDEHUMW1Y1GMISC2CK1CKGNDRCY
Page 20 and 21: TOTALINEWired Remote Sensor and Tim
Page 22 and 23: SECTION 7Calibrating the Thermostat

Manual Install Slimline P374-1900 Rev. 1

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?