instructions for use SM6 - Schneider Electric

More documents

Recommendations

Info

installation instructionspreparing the cubiclesfor switchboardassemblyGBM:bolt+washer: bolt + washer + nylstop nutA1BA2Remove the upper panel A1and A2 to acess the locking anglebracket.Remove the lifting ring B.CDSwivel the angle bracket 90˚ tothe leftRemove the front panel C and thenthe pallet D.(the bolts cannot be re---used).EFRemove top plate E. (4bolts)Remove top plate F. (6bolts)7896779EN revision : 01 15
GBCBA1A2Remove the upper panel A1 andA2 to acess the locking anglebracket.Remove the lifting ring B.DCSwivel the angle bracket 90˚ tothe leftRemove the front panel C and thenthe pallet D.(the bolts cannot be re---used).EFRemove top plate E. (8bolts)Remove top plate F. (12bolts)16 7896779EN revision : 01
Page 7: GBC A2 cubicle1 : low voltage conne
Page 10 and 11: handling instructionscubicle identi
Page 12 and 13: handling using a forklift7896779EN
Page 14 and 15: installation and operationrecommend
Page 18 and 19: assemblingthe switchboardchecks bef
Page 20 and 21: Version ±12 KVbag S6 : 3729746.Mou
Page 22 and 23: fitting fuses in aprotected phaseto
Page 24 and 25: low voltage connections(for GBC cub
Page 26 and 27: standard wiringdiagramL1L2L3for vol
Page 28 and 29: maintenance instructionspreventivem
Page 30 and 31: A1A2CConnect the wire coming from t
Page 32 and 33: CAUTIONpump the gas for at least 15
Page 34: group Schneider Electric servicecen

instructions for use SM6 - Schneider Electric

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?