instructions for use SM6 - Schneider Electric

More documents

Recommendations

Info

A1A2CConnect the wire coming from thecurrent step-down transformer.Fit the special nut and tighten itmoderately by hand .CAUTIONMake sure that nothing has beeninadvertently left in the busbarcompartment.Refit the front panel C and then thefront plate of the top compartmentA2 and A1.spare parts H Special fuses for RTF 300 andVRM3n step---down transformers.(for cubiclesGBC A3and GBC B3 only)H Forallotherreplacements,please consult us: see groupeSchneider Electric servicescenters.7896779EN revision : 01 29
ecovery of SF6 gasat end of lifefor disconnector cubicleThe SF6 must be removedbefore any dismantlingoperation can be carried out incompliance with the proceduresdescribed in IEC--61634 andaccording to the followinginstructions.The gas must be treated incompliance with IEC--60480.H volume of gas to berecovered: 35 litresH internal gauge pressure:40 kPANB : SF6 gas recycling at theend of circuit--breaker life, referto its instruction for use.Remove the cover (A) from thecontrol cabinet.control cover accessBRemove the control cover (B).Remove the 3 screws retaining theoperating mechanism.Cut the wiring to removethe operating mechanism.Drill 2 holes in the filler valvesafety cap∅ 4 mm, centreline 20 mm,max. depth 4 mm30 7896779EN revision : 01
Page 7: GBC A2 cubicle1 : low voltage conne
Page 10 and 11: handling instructionscubicle identi
Page 12 and 13: handling using a forklift7896779EN
Page 14 and 15: installation and operationrecommend
Page 16 and 17: installation instructionspreparing
Page 18 and 19: assemblingthe switchboardchecks bef
Page 20 and 21: Version ±12 KVbag S6 : 3729746.Mou
Page 22 and 23: fitting fuses in aprotected phaseto
Page 24 and 25: low voltage connections(for GBC cub
Page 26 and 27: standard wiringdiagramL1L2L3for vol
Page 28 and 29: maintenance instructionspreventivem
Page 32 and 33: CAUTIONpump the gas for at least 15
Page 34: group Schneider Electric servicecen

instructions for use SM6 - Schneider Electric

Create successful ePaper yourself

Delete template?

Save as template?