4Channel Stand Alone DVR - iMPath Networks
4Channel Stand Alone DVR - iMPath Networks
4Channel Stand Alone DVR - iMPath Networks
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3-2. Detailed Installation1) Rack mountCHAP. 3 Installation1. Remove 4 bolts on each side cap toinstall rack mount.2. Attach rack mount bracket to <strong>DVR</strong>.3. Attach <strong>DVR</strong> with rack mount bracket to 19” rack.2) HDD1. Connect Main Board and HDD1 using IDE cable and HDD power cable.2. The jumper setting of HDD1 should be on Master if you install only one HDD.3. The jumper setting of HDD1 should be on Master and HDD2 should be on Slave if you installtwo HDDs.(Refer to the above figure)4. Stick the HDD absorber (included in package) on the bottom of case and then install the HDDon top of them by using the bolts (included in package).5. Screws must be inserted from outside of the case bottom.10
Change language