Installation Instructions - Chris Alston's Chassisworks
Installation Instructions - Chris Alston's Chassisworks
Installation Instructions - Chris Alston's Chassisworks
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
25. Remove the rear lower control arm boltsat the rear end housing bracket.26. Slide the gusset bracket (7961-020)behind the lower coil-over mount andalong side the lower control bracket onthe housing.27. Bolt the gusset to the coil-over mountbracket with two 5/16-18 x 1-1/4” bolts,fl at washers and locknuts. DO NOT fullytighten the bolts at this time.28. Use the 1/2” fender washers as shims totake up any space between the gussetand the control arm mount.13