welder level c program outline - Industry Training Authority

TheoryPracticalLine DPerforms Shielded Metal Arc Welding (SMAW)% of Time20% 80%D-1 Describe the SMAW Process and Its Application D-2 Describe SMAW Equipment and Its Operation D-3Describe and Select Low Carbon Steel Electrodes forSMAWD-4 Describe Basic Joint Design and Weld Positions D-5Describe Causes of Weld Faults and Distortions inFabrications and Methods for Prevention and ControlD-6 Use the SMAW Process to Weld Beads in the Flat Position D-7Use the SMAW Process to Weld Fillet Welds on LowCarbon Steel Plate D-8Use the SMAW Process to Weld Fillet Welds on LowCarbon Steel Sheet D-9Describe and Demonstrate Surface Build Up and Hardfacein the Flat Position on Low Carbon Steel Plate D-10Use the SMAW process to Weld Groove Welds in the FlatG1 Position on Grey Cast Iron D-11Describe and Demonstrate Use of SMAW Stainless SteelElectrodes on Low Carbon Steel Plate D-15Use the SMAW Process to Weld Groove Welds on LowCarbon Steel Plate Line EE-1E-2E-3Performs Electric Arc Cutting, Gouging and RelatedProcesses (AAC) (PAC) (SMAC) % of TimeDescribe Electric Arc Cutting and Gouging Processes andTheir ApplicationsDescribe and Demonstrate AAC Equipment Its Cutting andGouging OperationsDescribe and Demonstrate PAC Equipment and Its Cuttingand Gouging Operations20% 80% Line FF-1F-2F-3F-4F-5F-6Perform Semi-Automatic Welding (GMAW) (GMAW-P)(FCAW) (GMAW/MC*) % of TimeDescribe the GMAW, GMAW-P, FCAW and GMAW/MC*Processes and Their ApplicationDescribe GMAW, GMAW-P, FCAW and GMAW/MC*Equipment and Their OperationDescribe and Select Filler Metal and Shielding Gases forGMAWUse the GMAW Process to Weld Stringer Beads and FilletWelds on Low Carbon Steel PlateUse the GMAW Process to Weld Fillet Welds on LowCarbon Steel SheetUse the GMAW Process to Weld Square Groove Welds onLow Carbon Steel Sheet25% 75% Welder Level C Program Outline • Industry Training Authority 8