welder level c program outline - Industry Training Authority

ACKNOWLEDGEMENTSThe Program Outline was prepared with the advice and direction from an industry SteeringCommittee convened by the Mechanical Contractors Association (MCA) with funding supportfrom the Industry Training Authority.Industry Steering CommitteeDana Taylor – Chair- Mechanical Contractors Association of B.C.Stan Boehm – President, S.S. Stainless Inc.Sheldon Frank – Welding Articulation Chair, University College of the Fraser ValleyMike Longo – Ideal WeldersBrad MQuhae – President, Accent Stainless Steel Mfg. Ltd.Brad Smith – Catalyst PaperBrian Pichette – Welding Supervisor, Empire Dynamic Structures Ltd.Paul Sourisseau – Interior Forest Labour Relations Association, Co-Chair HITACRon Van Eyk – President, Van Eyk Manufacturing Corp.John Van Muyen – President, I & J Metal Fabrications Ltd.John Little – Welding Industry ConsultantLes Wiebe – Welding Instructor, Thompson Rivers UniversityThe Industry Training Authority would like to acknowledge the dedication and hard work of theindustry representatives appointed to identify the training requirements of the Welding trade.Industry Subject Matter ExpertsJohn Little – Welding Industry ConsultantMervyn Kube – Piping Industry Apprenticeship BoardJim Carson – University College of the Fraser ValleyRod Walters – British Columbia Institute of TechnologySheldon Frank—University College of the Fraser ValleyLes Wiebe – Thompson Rivers UniversityStanley McArthur – Catalyst PaperStan Boehm – President, S.S. Stainless Inc.Gerry Dillman – WeyerhauserBarry Westgate – Spectra EnergyFacilitatorsDick Vanier – Training Consultant- Vanier Training Consultants Ltd.Rick Vanier – Facilitator - Vanier Training Consultants Ltd.Jody Jankola – Technical Writer - Vanier Training Consultants Ltd.Kathleen ONiel – Technical Writer - Vanier Training Consultants Ltd.Michelle Probert – Technical Writer - Vanier Training Consultants Ltd.Welder Level C Program Outline • Industry Training Authorityii