Model 28623TN - Ready Remote

You can learn more than one transmitter function at a time byadvancing to another transmitter learn Step.To do this, first release the momentary SW and then press/releaseit the same number of times as the difference between the currenttransmitter learn Step and the desired transmitter learn Step, andthen press/HOLD it.example! To advance from transmitter learn Step 2to transmitter learn Step 8, release the momentarySW and then press/release it 6 times and HOLD iton the 7th press.After Holding the Valet SW for 2 seconds the LED will flash 8 timesand repeat. You can now learn a transmitter button to step 8.There are several ways to exit transmitter Learning, by TimeOut,Ignition or momentary SW Presses.1. TimeOut: If more than 15 seconds elapse betweenmomentary SW presses or transmitter signals.2. Ignition: If the Ignition is turned off at any time duringtransmitter Learning.3. Momentary SW presses: if you press/release the momentarySW more times than transmitter Learning steps inthe menu.The Horn output will pulse 5 times rapidly and the Led will turnoff to indicate exiting feature programming.32 © 2006 Directed Electronics