Model 28623TN - Ready Remote

note! If the lights flash more than once and theengine does not start, refer to the No StartDiagnostics for the cause.important! Never remote start your vehicle when thekeys are in the ignition, except when activating QuickStop Mode, and never start the vehicle if it is not inPARK and the Parking brake is not set.important! It is unsafe to operate a vehicle's motorin a garage or other closed off area. Breathing theexhaust from the vehicle is hazardous to your health.Never activate the remote start in an enclosed space.When you are ready to drive the vehicle:➤➤Insert the ignition key and turn it to the ON (not theSTART) position.Press the brake pedal, the remote start will shut downand the engine will continue to runnote! If the brake pedal is pressed before the key isin the ON position, the engine will shut down.To shut down remote start:The remote start can be shut down in several ways for convenienceby the user or for safety by the shut down inputs.User remote start shut downs:➤ The transmitter button is pressed twice.➤Pulse the activation input wire twice© 2006 Directed Electronics53