7. operating the flexipress - Grass

More documents

Recommendations

Info

Dimensions Width of machine table 1000 mm Depth of machine table with a drilling distance of 20 mm 500 mm Height of machine table with base = option approx. 900 - 950 mm Height of machine table without base approx. 195 mm Overall machine height with base approx. 1610 - 1660 mm Overall machine height without base 910 mm Overall machine depth 1010 mm Adjustment Ranges Other Data 2 TECHNICAL SPECIFICATIONS Vertical Drilling Head Max. available length of drill bit 57 mm Drill bit diameter - maximum allowable diameter on cup drilling spindle 35 mm Drill bit diameter - maximum allowable diameter on all other spindles 15 mm Largest spacing possible in line of holes 200 mm Smallest spacing possible in line of holes 0 mm Cabinet hinge - largest cup spacing possible (bore hole centre distance) 50 mm Cabinet hinge - smallest cup spacing possible (bore hole centre distance) 9 mm Horizontal Drilling Head Drill bit length - largest possible length 150 mm Drill bit diameter - maximum allowable diameter 16 mm Height of bore hole - smallest possible bore hole height 5 mm Height of bore hole - largest possible bore hole height 40 mm Depth of bore hole - largest possible bore hole depth approx. 120 mm Pressing force at 0.6 MPa (6 bar) approx. 3000 N The star in your cabinet
Weights Total weight of Flexipress Vertical / Horizontal 21/03 with base approx. 268 Kg Total weight of Flexipress Vertical / Horizontal 21/03 without base approx. 223 Kg Electrical Connections Voltage specified on the nameplate ........ V Frequency specified on the nameplate ........ Hz Connected load of 3-phase motor 1.1 kW Cross section of the supply line to comply with local codes and regulations, but min. 1.5 mm 2 Supply line fuse max. 1.5 x nominal current as per nameplate, but max. 10 A Pneumatic Connections Dust-free, water-free and oil-free compressed air min. 5.5 bar Max. allowable pressure in supply line 10 bar Compressed air consumption per stroke at 6 bar approx. 1.25 ltrs Compressed air consumption per stroke, suction capacity for compressor approx. 7.5 ltrs Other Connections Dust suction removal - connection dia. for Vertical/Horizontal 21/03 2 x dia. 100 mm Required suction capacity per connection approx. 2000 m 3 /h Emission Values TECHNICAL SPECIFICATIONS Noise emission when drilling approx. 77.8 dB/A Dust emission into the air with Flexipress ...... mg/m 3 For details concerning emission values, see section 3-001 The star in your cabinet 3
Page 1: OPERATING INSTRUCTIONS Grass Flexip
Page 5 and 6: TABLE OF CONTENTS Page 7. Operating
Page 7 and 8: 1-001 List of Figures LIST OF FIGUR
Page 9 and 10: 2-001 Safety Information - It is th
Page 11 and 12: 2-006 Potential Hazards and Suitabl
Page 13 and 14: 3-002 Applications The Flexipress d
Page 15 and 16: 3. DESCRIPTION OF PRODUCTS Side sto
Page 17 and 18: 3. DESCRIPTION OF PRODUCTS Designat
Page 19 and 20: 4. DESCRIPTION OF MACHINE COMPONENT
Page 41 and 42: 6-001 Pneumatic Connection The Flex
Page 43 and 44: 7-1 Requirements for the Operators
Page 45 and 46: 7-301 Setting the Vertical Drilling
Page 47 and 48: 7-303 Setting the Vertical Drilling
Page 49 and 50: 7. OPERATING THE FLEXIPRESS 7-401 S
Page 51 and 52: 7-501 Setting the Side Stops Fig. 7
Page 53 and 54:
7-503 Using the Index Gauge When Dr
Page 55 and 56:
7-601 Drilling and Inserting Grass
Page 57 and 58:
7-602 Drilling and Inserting Grass
Page 59 and 60:
7-603 Drilling Lines of Holes Figs
Page 61 and 62:
7-604 Drilling Fronts for Grass Zar
Page 63 and 64:
7-605 Drilling Back Panels for Gras
Page 65 and 66:
7-606 Drilling and Inserting Visibl
Page 67 and 68:
7-607 Bohren und Einpressen von Ver
Page 69 and 70:
7-608 Drilling Holes for Handles Fi
Page 71 and 72:
7-609 Drilling Vertical Holes for D
Page 73 and 74:
7-610 Drilling Holes for Fastening
Page 75 and 76:
7-701 Drilling Horizontal Holes for
Page 77 and 78:
7-702 Drilling Horizontal Holes for
Page 79 and 80:
7-703 Drilling Holes for Joint Supp
Page 81 and 82:
7. OPERATING THE FLEXIPRESS 7-801 D
Page 83 and 84:
8. TROUBLE SHOOTING AND PROBLEM SOL
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
10-001 Guarantee Certificate Purcha
Page 99 and 100:
10-002 Disposal Form Purchaser: Nam
Page 101 and 102:
10-003 Resale Form Vendor: Name: .
Page 103 and 104:
10-004 Questionnaire 1 - Reason for
Page 105 and 106:
10-005 Questionnaire 2 - Satisfacti
Page 107 and 108:
The star in your cabinet NOTES 107
Page 109 and 110:
REPRESENTATIVES AROUND THE WORLD MD
show all

7. operating the flexipress - Grass

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?