Ford Everest.pdf

Body5. Wind each end of the piano wirearound a bar.• Use a long sawing action tospread the work over the wholelength of the piano wire toprevent it from breaking.6. Working with another person, sawthrough the sealant around the edgeof the glass.7. Remove the side window glass.Side Window glass Installation• Proper installation of the side window glass may be difficult if thesealant is cracked or the glass is pushed out by air pressurewhen a door is opened/closed with all the windows closed. Leaveall the windows open until the side window glass is installedcompletely.1. Cut away the old sealant using a razor so that 1-2mm thickness ofsealant remains around the circumference if the frame.• Using a razor with bare hands can cause injury. Always weargloves when using a razor.2. If the sealant has come off completely in any one place, apply someprimer after degreasing, and allow it approximately 30 minutes to dry.Then put new sealant to create a 2mm layer.3. Clean and degrease an approximately 50mm wide strip around thecircumference of the glass and the bonding area on the body.4. Insert the spacers into the body.38Copyright © 2009 Ford Motor Company of Southern Africa.