Ford Everest.pdf

Recommendations

Info

Restraint SystemAirbag System Component Location72145361 Driver-Side Airbag Module 4 Pre-tensioner Seatbelt2 Passenger-Side Airbag Module5 SAS Control Module6 Side Airbag Sensor3 Side Airbag Module 7 Clock SpringDriver-Side Airbag Module• Handling the airbag module improperly can accidentally deploythe airbag module, which may seriously injure you.1. Turn the engine switch to the LOCK position.2. Disconnect the negative battery cable and wait for 1 minute or more.3. Remove in the order indicated in the table.1 Bolt2 Connector3 Driver-Side Airbag Module3 7.9-11.7n.m2148Copyright © 2009 <strong>Ford</strong> Motor Company of Southern Africa.
Restraint System4. Install in the reverse order of removal.5. Turn the engine switch to the ON position.6. Verify that the airbag system warning light illuminates forapproximately 6 seconds and goes out.Passenger-Side Airbag Module• Handling the airbag module improperly can accidentally deploythe airbag module, which may seriously injure you.1. Turn the engine switch to the LOCK position.2. Disconnect the negative battery cable and wait for 1 minute or more.3. Remove the glove compartment.4. Remove in the order indicated in the table.311 Connector2 Bolt3 Passenger-Side Airbag Module6.9-9.8n.m25. Install in the reverse order of removal.6. Turn the engine switch to the ON position.7. Verify that the airbag system warning light illuminates forapproximately 6 seconds and goes out.Side Airbag Module• Handling the airbag module improperly can accidentally deploythe airbag module, which may seriously injure you.• If the side airbag module is installed with debris in the seat back,the foreign material may be scattered when the side airbagmodule operates (deploys), causing injury. Verify that there is noforeign material in the seat back before installing the side airbagmodule.1. Turn the engine switch to the LOCK position.2. Disconnect the negative battery cable and wait for 1 minute or more.3. Remove in the order indicated in the table.Copyright © 2009 <strong>Ford</strong> Motor Company of Southern Africa. 49
Page 1 and 2: EverestModel Introduction Training
Page 3 and 4: ContentsOverview 4New Technical Spe
Page 5 and 6: OverviewModels3.0TDCi 4x2 M/T XLTKe
Page 7 and 8: OverviewPower and PerformancePeak T
Page 9 and 10: OverviewFord Everest Dimensions5062
Page 11 and 12: Technical SpecificationsRear Brake
Page 13 and 14: Technical SpecificationsABS Wheel-S
Page 15 and 16: Technical SpecificationsSuspensionF
Page 17 and 18: Technical Specifications4x424.5-36.
Page 19 and 20: Technical Specifications• The rig
Page 21 and 22: BodyWith Manual TransmissionIf the
Page 23 and 24: BodyFront Lift PostRear Lift PostFr
Page 25 and 26: BodyCabin Side Frame Straight Line
Page 27 and 28: BodyPointSymbolDesignationHole Diam
Page 29 and 30: BodyPointSymbolDesignationHole Diam
Page 31 and 32: BodyRear Body Straight Line Dimensi
Page 33 and 34: BodyBody StructurePure SUV stylingT
Page 35 and 36: BodySide Inner Panels84735261910121
Page 37 and 38: BodyGlass1 Rear Window Glass 3 Rear
Page 39 and 40: Body5. Use only glass primer on the
Page 41 and 42: BodyThe Aluminium Anodizing Process
Page 43 and 44: Restraint System• A live (undeplo
Page 45 and 46: Restraint System• If the side air
Page 47: Restraint SystemAirbag module, pre-
Page 51 and 52: Restraint System1 Bolt A6.9-9.8n.m1
Page 53 and 54: Restraint SystemClock Spring Inspec
Page 55 and 56: Restraint SystemSeatbelt Inspection
Page 57 and 58: Restraint SystemThird-row Seatbelt
Page 59 and 60: WildtrakWildtrak front bumper re-wo
Page 61 and 62: Notes:Copyright © 2009 Ford Motor
Page 63 and 64: Copyright © 2009 Ford Motor Compan

Ford Everest.pdf

Create successful ePaper yourself

Delete template?

Save as template?