You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Restraint System41 Cup2 Bolt33 Side Airbag Module4 Connector 7.9-11.7n.m214. Install in the reverse order of removal.5. Turn the engine switch to the ON position.6. Verify that the airbag system warning light illuminates forapproximately 6 seconds and goes out.SAS Control Module• Handling the SAS control module improperly can accidentallydeploy the airbag modules and pre-tensioner seatbelt, which mayseriously injure you.1. Turn the engine switch to the LOCK position.2. Disconnect the negative battery cable and wait for 1 minute or more.3. Remove the console.4. Remove in the order indicated in the table.326.9-9.8n.m1 Connector2 Bolt13 SAS Control ModuleSide Airbag Sensor• Handling the side airbag sensor improperly can accidentallydeploy the airbag module, which may seriously injure you.1. Turn the engine switch to the LOCK position.2. Disconnect the negative battery cable and wait for 1 minute or more.3. Remove in the order indicated in the table.50Copyright © 2009 <strong>Ford</strong> Motor Company of Southern Africa.
Change language