INFOBALE - Hjallerup Maskinforretning A/S

EN• ML = Machine Load sensor • Current value• Twine sensor • Current value• PTO test • 0 = no signal• 1 = signal• FF (packer) test • 0 = no signal• 1 = signal• Bind = tying needle • 0 = no signal• 1 = signal• Opticut • 0 = no signal• 1 = signal• Needle frame shear bolt • 0 = no signal• 1 = signal• Keyboard test screen for keysand LEDs• Start F- menu• Press a key —> The key numberappears on the display and theLED will go out. Press a key twiceto return to the basic screen.• Menu selection test / settings • Settings - menu is selected• On-board computer softwareversion• V1.07 19 – 07 – 00 = softwareversion• Implement software version • V1.07 19 – 07 – 00 = softwareversion• PIN code • Not available• ML- offset • 287 = current (counts) of sensor• 170 = setting for ML sensor if noload)14© Kverneland