INFOBALE - Hjallerup Maskinforretning A/S

EN10) Trouble shooting tableCaution: the electronic control system operates reliably. Most malfunctions are caused by incorrect connections.The central operating panel on the machine may only be opened by people with sufficient expertise. Make sureno dirt gets into the opened central operating panel.MALFUNCTION CAUSE SOLUTION- no message on the monitoring andcontrol box- no power supply to the controlsystem- alarm « no connection » appears on - control box not equipped withthe display"HIGH DENSITY BALER" computerprogram- switch on the device- check the system power- check fuses- switch off and back on at properpower supply- check power supply of centralcontrol panel- check connection between controlbox and machine box- internal control system problem - consult your dealer- recurring alarm - sensor set incorrectly - check sensor setting© Kverneland21